Investigation of Impact Damage of PMC Specimens using SEM

Authors

  • Channabasavaraj S. Professor & HOD, RRIT, Bangalore, India
  • Amarnath G. Associate Professor, RRIT, Bangalore, India
  • Gururaj Naik Associate Professor, RRIT, Bangalore, India
  • Naveen G. Associate Professor, RRIT, Bangalore, India

Keywords:

-

Abstract

The work presented in this paper investigates the the results of microscopic examinations of delaminations and transverse cracks detected with scanned image microscopy, from which the initiation and propagation mechanisms of the impact-induced damage were discussed. Visual examination of the impacted samples reveals that the damage in the fibres was developed around the point of impact, which results in considerable strength loss.

References

Choi, H.Y. and Chang, F.K. (1992). A Model for Predicting Damage in glass/epoxy Laminated Composites Resulting from Low-Velocity Point Impact, J. Composite Materials, 26(14): 2134-2169.

Choi, H.Y., Downs, R.J. and Chang, F.K. (1991). A New Approach toward Understanding Damage Mechanisms and Mechanics of Laminated Composites Due to Low-Velocity Impact; Part I-Experiments,

Davies, G.A.O., Hitchings, D. And Wang, J. (2000). Prediction of Threshold Impact energy for Onset of Delamination in Quasi-Isotropic glass/Epoxy Composites Laminates under Low-Velocity Impact, Composite Science and Technology, 60: 1

Ganapathy, S. And Rao, K.P. (1998). Failure Analysis of Laminated Composites Cylindrical/Spherical Shell Panel Subjected to Low-Velocity Impact, Computers and Structures, 68

Hosur, M.V., Murthy, C.R.L., Ramamurthy, T.S. and Shet, A. (1998). Estimation of Impact- induced Damage in CFRP Laminates through Ultrasonic Imaging, NDN&E International, 31(50): 359-374.

Hou, J.P., Petrinic, N., Ruiz, C. And Hallett, S.R. (2000). Prediction of Impact Damage in Composites Plates, Composites Science and Technology, 60: 273-281.

Kistler, L.S. and Waas, A.M. (1999). On the Response of Curved Laminated Panels Subjected to Transverse Impact Loads, IJSS, 34: 1311-1327.

Luo, R.K., Green, E.R. and Morrison, C.J. (1999). Impact Damage Analysis of Composite Plates, Int. J. Impact Engineering, 22: 435-447.

Oguibe, C.N. and Webb, D.C. (1999). Finite-Element Modelling of the Impact Response of a Laminated Composite Plates, Composites Science and Technology, 59: 1913-1922.

Sun, C.T. and Chen, J.K. (1985). On the Impact of Intially Stressed Composite laminates, J. Composites Materials, 19: 490-504.

Sun, C.T. and Chen, J.K. (1985). On the Impact of Intially Stressed Composite laminates, J. Composites Materials, 19: 490-504.

Velmurugan.R, Solaimurugan.S, “ Improvements in Mode I interlaminar fracture toughness and in-plane mechanical properties of stitched glass/polyester composites”.

Wang Ying, Hahn Thomas H, “ AFM characterization of the interfacial properties of carbon fiber reinforced polymer composites subjected to hygrothermal treatments.” Composites.

Downloads

Published

10-06-2019

How to Cite

Channabasavaraj S., Amarnath G., Gururaj Naik, & Naveen G. (2019). Investigation of Impact Damage of PMC Specimens using SEM. International Journal of Management Studies (IJMS), 6(Spl Issue 9), 132–136. Retrieved from https://researchersworld.com/index.php/ijms/article/view/2227

Issue

Section

Articles