Design and Development of Metal Air Battery

Authors

  • Navaneetha Krishna Assistant Professor, Department of EEE, R.R. Institute of Technology, India
  • Somashekar K. J. Associate Professor, Department of EEE, R.R. Institute of Technology, India
  • Renukamba J. N. Assistant Professor, Department of EEE, R.R. Institute of Technology, India
  • Shyam Sundar S. Assistant Professor, Department of EEE, R.R. Institute of Technology, India

Keywords:

Aluminum–air batteries, Batteries, Metal-air batteries

Abstract

With advancement of portable electronic devices and electrification of transportation rises a need for more advanced battery systems that can power these systems. Tremendous research is ongoing in new battery technologies to satisfy the energy storage requirements. Batteries with high energy density, long cycle life, and safe and low cost are the need of the hour. Metal-air batteries seem to be promising candidates for the future battery requirements because of their higher specific capacity and energy density as compared with lithium-ion batteries. The aqueous alkali electrolytes, though widely used at present, may be suitably replaced by non-aqueous electrolytes, aprotic and ionic liquids for both primary and secondary batteries. Aluminum-air power sources are receiving increased attention for applications in portable electronic devices, transportation, and energy systems. The results of this work demonstrate the feasibility of AA ECGs as portable reserve and emergency power sources, as well as power sources for electric vehicles.

References

A.V. Ilyukhina, B.V. Kleymenov, A.Z. Zhuk, Development and study of aluminum-air electrochemical generator and its main components, Journal of Power Sources 342 (2017) 741e749, http://dx.doi.org/10.1016/j.jpowsour.2016.12.105

D.R. Egan, C. Ponce de León, R.J.K. Wood, R.L. Jones, K.R. Stokes, F.C. Walsh, Developments in electrode materials and electrolytes for aluminium-air batteries, Journal of Power Sources 236 (2013) 293e310, http://dx.doi.org/10.1016/j.jpowsour.2013.01.141

M.L. Doche, V F. Novel-Cattin, R. Durand, J.J. Rameau, Characterization of different grades of aluminum anodes for aluminum/ air batteries, Journal of Power Sources 65 ( 1997) 197-205

N. Chawla, Recent advances in air-battery chemistries, Materials Today Chemistry 12 (2019) 324e331, Science Direct, https://doi.org/10.1016/j.mtchem.2019.03.006

P. Goel, D. Dobhal, R.C. Sharma, Aluminum–air batteries: A viability review, Journal of Energy Storage 28 (2020) 101287, Science Direct, https://doi.org/10.1016/j.est.2020.101287

Petros Katsoufis, Vasiliki Mylona, Constantin Politis, George Avgouropoulos, Panagiotis Lianos, Study of some basic operation conditions of an Al-air battery using technical grade commercial aluminium, Journal of Power Sources 450 (2020) 227624, Science Direct, https://doi.org/10.1016/j.jpowsour.2019.227624

R.D. Mckerracher, A. Holland, A. Cruden, R.G.A. Wills, Comparison of Carbon Materials as Cathodes for the Aluminium-ion Battery, Carbon, 10.1016/j.carbon.2018.12.021

Yisi Liu, Qian Sun, Wenzhang Li, Keegan R. Adair, Jie Li, Xueliang Sun, A comprehensive review in recent progress in aluminium-air batteries, Green Energy & Environment 2 (2017) 246e277, http://dx.doi.org/10.1016/j.gee.2017.06.006

Downloads

Published

10-06-2019

How to Cite

Navaneetha Krishna, Somashekar K. J., Renukamba J. N., & Shyam Sundar S. (2019). Design and Development of Metal Air Battery. International Journal of Management Studies (IJMS), 6(Spl Issue 8), 01–07. Retrieved from https://researchersworld.com/index.php/ijms/article/view/2182

Issue

Section

Articles